Aerials & Aerial Parts
Our magnetic mount aerials are lightweight yet hi-strength using rare earth magnets with rubber moulded over a non-scratch base.

Extremely popular as it's an inexpensive taxi mount for VHF and UHF radios.

Fully waterproof. The most used taxi kit made in the UK.

Available with BNC, PL259 or Mini-PL259 plug fitted

  • Manufactured entirely in the UK.
  • Polarity  VERTICAL
  • VSWR  1.5 : 1
  • Base Diameter: 60 mm
  • Cable  5.00 metres of RG58CU
  • Connector:  Crimp BNC with cable strain, or Mini PL259 (GM300), or PL259 
  • Power  40 WATTS
  • Impedance  50 OHM
  • Frequency:  66-470 Mhz, cut for your appropriate band.
!

Complete Magnetic Mount Aerial BNC

!

Supplied with BNC, cut for 165-174 Mhz (VHF Highband)

Complete Magnetic Mount Aerial PL259

!

Supplied with PL259, cut for 165-174 Mhz (VHF Highband)

Complete Magnetic Mount Aerial Mini-PL259

!

Supplied with Mini-PL259, cut for 165-174 Mhz (VHF Highband) suitable for Motorola GM300 or LCS2000

Micromount VHF Magnetic Mount Aerial BNC

!

Supplied with BNC, cut for 165-174 Mhz (VHF Highband)

An extremely slim and light weight 1/4 wave VHF magnetic antenna kit comprising of a very slim whip (approx. length 58cm), assembled on an extremely small size magnet which is approximately 1” (2.5cm) in diameter, prewired with about 4m of RG174 cable and BNC connector.

The cable used is extremely thin, very easy to route, and this aerial is very popular for semi-covert installations.

 

Complete Magnetic Mount Aerial BNC

!

Supplied with BNC, cut for 66-88Mhz (VHF Lowband)

Complete Magnetic Mount Aerial PL259

!

Supplied with PL259, cut for 66-88Mhz (VHF Lowband)

Complete Magnetic Mount Aerial BNC

!

Supplied with BNC, cut for 420-470 Mhz (UHF Band)

Complete Magnetic Mount Aerial Mini-PL259

!

Supplied with Mini-PL259, cut for 420-470 Mhz (UHF Band) suitable for Motorola GM300 or LCS2000

Micromount UHF Magnetic Mount Aerial BNC

!

Supplied with BNC, cut for 420-470 Mhz (UHF Band)

An extremely slim and light weight 1/4 wave VHF magnetic antenna kit comprising of a very slim whip approx. length 6" (18cm), assembled on an extremely small size magnet which is approximately 1” (2.5cm) in diameter, prewired with about 4m of RG174 cable and BNC connector.

The cable used is extremely thin, very easy to route, and this aerial is very popular for semi-covert installations.

 

Model ADP1 - SO239 to BNC Adaptor

!
Model: ADP1 - SO239 to BNC Male Adaptor

This is for connecting a radio that has a BNC chassis socket on it but the aerial lead has a PL259 plug.