East London Communications

The MIB 2 is our latest Interface Box and will program all of the radios that the MIB will do, and all of the Jedi Series including the GP900 & GM900 that our MIB couldn't program. It is pin for pin compatible with all existing Motorola RIB programming leads.

With the correct original Motorola software and a suitable lead it will programme a minimum of the following: Astro Saber, CDM1250, CDM1550, CDM1550-LS, CDM1550LS Plus, CDM750, CM140, CM160, CM200, CM300, CM340, CM360, CP040, CP140, CP150, CP160, CP180, CP200, CT150, CT250, CT450, CT450-LS, DeskTrac, EM200, EM400, EP450, EX500, EX600, EX600-XLS, GL2000, GM1280, GM140, GM160, GM300, GM3188, GM338, GM340, GM350, GM360, GM3688, GM380, GM600, GM640, GM640, GM660, GM900, GM950, GP1200, GP1280, GP2000, GP2100, GP238, GP280, GP300, GP318, GP320, GP328, GP328 Plus, GP338, GP338 Plus, GP340, GP344, GP350, GP360, GP380, GP388, GP600, GP620, GP640, GP660, P680, GP88, GP900, GR300, GR400, GR500, GTX LTR Portable, GTX Mobile, GTX Portable, GTX Privacy Plus Portable, HT600, HT600E, HT800, HT1000, HT1250, HT1250-LS, HT1250-LS Plus, HT1550, HT1550-XLS, HT600, HT600E, HT750, HT800, JT1000, LCS2000, LTS2000, LTS2000, M10, M100, M120, M1225, M130, M200, M400, MaraTrac, MaxTrac, MCX1000, MCX600, MCX760, MCX780, MOF230, MT1000, MT2000, MT2100, MTS2000, MTX-LS, MTX800, MTX8000, MTX810, MTX820, MTX8250, MTX8250-LS, MTX838, MTX850, MTX850-LS, MTX888, MTX900, MTX9000, MTX9250, MTX950, MX1000, MX2000, MX3000, P040, P080, P110, P200, P210, P500, PM400, PR400, PR860, PRO2150, PRO3100, PRO3150, PRO5100, PRO5150, PRO5350, PRO5450, PRO5550, PRO5750, PRO7100, PRO7150, PRO7350, PRO7450, PRO7550, PRO7750, PRO9150, PTX1200, PTX600, Saber Si, SM120, SM50, Spectra High Power, Spectra Low Power, Sportbase, Systems Saber, Visar, VL130, XTS3000, XTS3500 and all other Motorola radios compatible with the original Motorola RIB Box. 

The MIB 2 box comes with a 1 metre 9 pin male to female serial cable. It features an on/off switch, red data transfer LED to show active communication with the radio and white green LED to show power ON status. The unit has a DC 9V internal battery compartment and an external DC 9-12 v dc socket to use with an external power supply (Not Included).     Dimensions: 100 x 60 x 28 mm

This is a "RIBLESS" product (RIB or MIB box not required).   You may need to power this up with 7.5v for portables and some mobiles.

RJ45 to radio:
ALL Maxtrac Mobiles, GM340, GM360, GM380, CM140, CM200, CM300, PM400, GR400, GR500, GM300, GM350, GTX Mobile, M1225, M10, M100, M120, M130, M200, M1225, Sportbase, M400, Radius Mobile, GR300, GR1225, R1225, LCS2000, Maratrac, SM50, SM120 and Desktrac.

Does EARLY Icom Mobiles that have RJ45 such as F1010. (I will upload confirmation of other models as we test them). 

You must power this interface with 12v for it to program some of the above mobiles.

Dummy Battery Box Connector to Radio:
Motorola GP300, P110, LCS2000, GP88 portables
Requires a power supply or battery (9V)

Multi-pin Adapter to Radio:
Motorola GP320, GP328, GP338, GP340, GP360, GP380, GP640, GP1280,HT750, HT1250, HT1550, GP318, PRO7150, PRO9150 & PRO5150.

2nd Multi-pin Adapter to Radio:
Motorola GP344, GP388, and others.

2.5 mm plug to Radio:
Motorola CP040, P040, P080, CP200, CP150, CT150, CT250, CT450, CT450-LS, GP2000, GP2100,  PRO3150, PR400, & GP68 Radios.

Radios that this programmer will NOT do:   GM900,  & Jedi (GP900/MT6000E/MTS2000 etc).

This is a programming boot which takes the place of a battery pack. It is manufactured in an empty Motorola GP300 battery case. The spring loaded pin mates with the PCB for serial programming, and the two battery contacts line up with the tags on the tranceiver body.  

It is suitable for:

RJ45 to radio:
ALL Maxtrac Mobiles, GM340, GM360, GM380, CM140, CM200, CM300, PM400, GR400, GR500, GM300, GM350, GTX Mobile, M1225, M10, M100, M120, M130, M200, M1225, Sportbase, M400, Radius Mobile, GR300, GR1225, R1225, LCS2000, Maratrac, SM50, SM120 and Desktrac.

You must power this interface with 12v for it to program some of the above mobiles.

Dummy Battery Box Connector to Radio:
Motorola GP300, P110, LCS2000, GP88 portables
Requires a power supply or battery (9V)

2.5 mm plug to Radio:
Motorola CP040, P040, P080, CP200, CP150, CT150, CT250, CT450, CT450-LS, GP2000, GP2100,  PRO3150, PR400, & GP68 Radios.

This is a programming boot which takes the place of a battery pack. It is manufactured in an empty Motorola P110 battery case. The spring loaded pin mates with the PCB for serial programming, and the two battery contacts line up with the tags on the tranceiver body.   

Two leads emerge from the GPX case.  One is terminated in a 25 way D plug which connects to either our MIB Two Interface or Motorolas own RIB Box.  The other lead is a small PP3 type battery tag to which 7.5v to 9v dc must be connected in order to power the radio during programming/reading.

This is the Programming Lead for Motorola GM Series mobiles. It will programme a minimum of GM300, GM350, GM950, CM140, GM600, LTS2000, GM340, GM360 & GM380.

Goes between Motorola RIB Box or our MIB 2 Interface and Radio. Plugs into radio microphone socket.

This is a "Ribless" lead - no need for MIB or RIB programming box. One end plugs into the radios Mic socket.  The other end plugs directly into a 25 way "D" serial port on the PC.  The electronics are hidden inside the D shell.

It will programme Motorola McMicro, M110 and Centro / Compact Base.   

This lead must be used with a very slow PC - 286/386 or 486 ideal.

This product is built to order - please allow up to 14 days for delivery.

This is a "Ribless" lead - no need for MIB or RIB programming box. This is designed to program MCMicros that have a speaker/mic remote head or a M110/McMicro where it will not programme through the head.

One end plugs into the 15 way tranceiver D Socket.  The other end plugs directly into a 25 way "D" serial port on the PC.  The electronics are hidden inside the D shell. (The picture shows similar product but the plugs are both "D" types).

It will programme Motorola McMicro and M110.   

This lead must be used with a very slow PC - 286/386 or 486 ideal.

This product is built to order - please allow up to 14 days for delivery.

2.5 mm plug to Radio:
Motorola CP040, P040, P080, CP200, CP150, CT150, CT250, CT450, CT450-LS, GP2000, GP2100,  PRO3150, PR400, & GP68 Radios.

Comprises a simple lead that goes between your PC 9 pin serial port and the portables accessory socket. No other Interface required. 

Programming Lead for Motorola GM900 mobiles.  Plugs between Mic Socket on radio and either Original Motorola Rib Box or our MIB Two interface.

Model L25

Programming Lead for Motorola GP320, GP340, GP360, GP380, GP620, GP640, GP660 GP680 Handportables.  Plugs between side accessory socket on radio and with Motorola RIB or our MIB 2.

.