East London Communications

Product Details
Model: UPL1   Universal Car Power Lead Kit

This vehicle power lead kit is designed to provide DC fused power from the vehicle battery to the two-way radio mounting position under the dash or at the centre console.

This pack contains:

Approx 4.5m twin red & black cable with large soldered eyelets to clamp to the battery terminals, and there is a fuseholder with a 10 amp fuse behind the tags. The other end is stripped and tinned. The cable is rated at 10A.

4 x Tie-wrap cable ties.

1 x Twin "choc-block" terminal.

1 x Instruction sheet.

Product Details
Model: UPL1   Universal Car Power Lead Kit

This vehicle power lead kit is designed to provide DC fused power from the vehicle battery to the two-way radio mounting position under the dash or at the centre console.

This pack contains:

Approx 4.5m twin red & black cable with large soldered eyelets to clamp to the battery terminals, and there is a fuseholder with a 10 amp fuse behind the tags. The other end is stripped and tinned. The cable is rated at 10A.

4 x Tie-wrap cable ties.

1 x Twin "choc-block" terminal.

1 x Instruction sheet. 

Product Details
Model: UPL2   Universal Car Power Lead Kit for LONDON Customers 

This vehicle power lead kit is designed to provide DC fused power from the vehicle battery to the two-way radio mounting position under the dash or at the centre console.

This pack contains:

Approx 4.5m twin red & black cable with large soldered eyelets to clamp to the battery terminals, and there is a fuseholder with a 10 amp fuse behind the tags. The other end is stripped and tinned. The cable is rated at 10A.

4 x Tie-wrap cable ties.

1 x Twin "choc-block" terminal to fuseholder tail.

1 x Instruction sheet.

Please Note:
The difference between this pack and the UPL1 above is that this pack has a fuseholder tail containing at one end the "choc-block" terminal, and the other has a white RS style bayonet fuseholder that has been split on two legs.  This is the unofficial convention used in London where at the radio end the long fuseholder moulding is on the positive lead and the short part on the negative lead.

Product Details
Model: UPL2   Universal Car Power Lead Kit for LONDON Customers. Pack of ten kits 

This vehicle power lead kit is designed to provide DC fused power from the vehicle battery to the two-way radio mounting position under the dash or at the centre console.

Each kit contains:

Approx 4.5m twin red & black cable with large soldered eyelets to clamp to the battery terminals, and there is a fuseholder with a 10 amp fuse behind the tags. The other end is stripped and tinned. The cable is rated at 10A.

4 x Tie-wrap cable ties.

1 x Twin "choc-block" terminal to fuseholder tail.

1 x Instruction sheet.

Please Note:
The difference between this pack and the UPL1 above is that this pack has a fuseholder tail containing at one end the "choc-block" terminal, and the other has a white RS style bayonet fuseholder that has been split on two legs.  This is the unofficial convention used in London where at the radio end the long fuseholder moulding is on the positive lead and the short part on the negative lead.

Product Details
Our Model:  PG3N-DCL

Fits KENWOOD  TK-768/868, TK-708/808, TK-768G/868G, TK-7108/8108

Cable rated at 12A.

Product Details
Our Model:  PG3N-DCL.  Pack of ten.

Fits KENWOOD  TK-768/868, TK-708/808, TK-768G/868G, TK-7108/8108

Cable rated at 12A.

Plug shell and 4 pins to make your own Tait T500 Power Plug tails. (Cables not supplied)

Plug shell and 4 pins to make your own Tait T500 Power Plug tails. (Cables not supplied)

Assembled short tail about 20cm long with red & black 10A "figure of 8" cable. Radio ends are unterminated to suit your connector.

Assembled short tail about 20cm long with red & black 10A "figure of 8" cable. Radio ends are unterminated to suit your connector.